Custom bulk filament
for your project

With a higher melt flow index the material flows more easily and melts more evenly, so it can be printed faster. This makes parts marginally weaker than the standard version.

Minimum 50 kg · increases in steps of 10 kg

Dette blir 50 spoler à 1kg = 50 kg totalt.

Volume discount: 1% off per 100 kg ordered.

Order 6 months of your usage at once and we give 1% off per 100 kg, up to 10%.

Reinforced filament is always matte due to the fibre content.

TD 2,0 · dekkende · ca. 3 til 5 % pigment

TD (transmission distance) sets how translucent the filament is: low TD (0.1 to 2) = fully opaque, high TD (4 to 6) = translucent. We set the pigment amount needed to hit your chosen TD. More opaque means a little more pigment.

Screen colour and finished plastic can differ slightly from the hex code. If you need an exact match, ask for a colour sample in the notes.

1.75 mm is the standard most printers use. 2.85 mm is used by Ultimaker and some older machines. Need something else? Choose an exact diameter from 0.8 to 5.0 mm. Custom diameters have a 100 kg minimum order.